Claude Video Edit

claude-video-edit — Video Editing Operations

Pre-Flight

Before every operation that writes a file: 1. Run bash scripts/preflight.sh "$INPUT" "$OUTPUT" 2. If it fails, stop and report the error to the user 3. For encoding operations, run bash scripts/detect_gpu.sh to choose encoder

Operations

Trimming

Lossless trim (keyframe-aligned, instant, no re-encode):

ffmpeg -n -ss HH:MM:SS -i "$INPUT" -t DURATION -c copy "$OUTPUT"

Note: -ss BEFORE -i for fast seeking. Duration in seconds or HH:MM:SS.

Frame-accurate trim (re-encodes, precise to any frame):

ffmpeg -n -i "$INPUT" -ss HH:MM:SS -t DURATION -c:v libx264 -crf 20 -c:a aac "$OUTPUT"

Note: -ss AFTER -i for frame accuracy. Use when precision matters.

Remove first/last N seconds:

• Remove first 10s: -ss 10 -c copy
• Remove last 10s: get duration with ffprobe, then trim to duration - 10

Splitting

Split at specific time:

ffmpeg -n -i "$INPUT" -t 60 -c copy part1.mp4
ffmpeg -n -i "$INPUT" -ss 60 -c copy part2.mp4

Split into equal segments:

ffmpeg -n -i "$INPUT" -f segment -segment_time 300 -c copy -reset_timestamps 1 "segment_%03d.mp4"

Split at scene boundaries (load references/analyze.md for PySceneDetect):

scenedetect -i "$INPUT" detect-adaptive -t 3.0 split-video

Concatenation

Same codec (no re-encode):

printf "file '%s'\n" file1.mp4 file2.mp4 file3.mp4 > /tmp/concat_list.txt
ffmpeg -n -f concat -safe 0 -i /tmp/concat_list.txt -c copy "$OUTPUT"
rm /tmp/concat_list.txt

Different codecs (re-encodes):

ffmpeg -n -i file1.mp4 -i file2.mp4 -filter_complex "[0:v][0:a][1:v][1:a]concat=n=2:v=1:a=1" "$OUTPUT"

Speed Changes

Speed up 2x (with audio pitch correction):

ffmpeg -n -i "$INPUT" -vf "setpts=0.5*PTS" -af "atempo=2.0" "$OUTPUT"

Slow down 0.5x:

ffmpeg -n -i "$INPUT" -vf "setpts=2.0*PTS" -af "atempo=0.5" "$OUTPUT"

Speed factors: For atempo, valid range is 0.5–100.0. For extreme changes, chain: atempo=2.0,atempo=2.0 = 4x.

Frame interpolation slow-motion (AI-generated intermediate frames):

ffmpeg -n -i "$INPUT" -vf "minterpolate=fps=60:mi_mode=mci:mc_mode=aobmc:vsbmc=1" "$OUTPUT"

Warning: Very slow (~0.05x realtime). Best for short clips.

Cropping, Scaling, Rotation

Crop (width:height:x:y):

ffmpeg -n -i "$INPUT" -vf "crop=640:480:100:50" "$OUTPUT"

Scale (keep aspect ratio, even dimensions):

ffmpeg -n -i "$INPUT" -vf "scale=1280:-2:flags=lanczos" "$OUTPUT"

Scale to exact size with padding (letterbox):

ffmpeg -n -i "$INPUT" -vf "scale=1920:1080:force_original_aspect_ratio=decrease,pad=1920:1080:(ow-iw)/2:(oh-ih)/2:black" "$OUTPUT"

Rotate 90° clockwise: -vf "transpose=1" Rotate 90° counter-clockwise: -vf "transpose=2" Rotate 180°: -vf "transpose=1,transpose=1" Arbitrary angle: -vf "rotate=PI/6:fillcolor=black" Flip horizontal: -vf "hflip" | Vertical: -vf "vflip"

Overlays and Watermarks

Image watermark (bottom-right with 10px margin):

ffmpeg -n -i "$INPUT" -i logo.png -filter_complex "overlay=W-w-10:H-h-10" "$OUTPUT"

Picture-in-picture (small video in corner):

ffmpeg -n -i "$INPUT" -i pip.mp4 -filter_complex "[1:v]scale=320:180[pip];[0:v][pip]overlay=10:10" "$OUTPUT"

Text overlay:

ffmpeg -n -i "$INPUT" -vf "drawtext=text='My Title':fontsize=48:fontcolor=white:x=(w-tw)/2:y=50:fontfile=/usr/share/fonts/truetype/dejavu/DejaVuSans-Bold.ttf:box=1:boxcolor=black@0.5:boxborderw=8" "$OUTPUT"

Timed text (show between 5s and 15s):

-vf "drawtext=text='Hello':enable='between(t,5,15)':fontsize=36:fontcolor=white:x=10:y=10"

Green Screen (Chromakey)

ffmpeg -n -i greenscreen.mp4 -i background.mp4 -filter_complex \
  "[0:v]chromakey=0x00FF00:0.1:0.2[fg];[1:v][fg]overlay" "$OUTPUT"

Adjust color hex, similarity (0.1), and blend (0.2) for best results.

Video Stabilization

Two-pass process using vidstab:

# Pass 1: Analyze motion
ffmpeg -i "$INPUT" -vf vidstabdetect=shakiness=5:accuracy=15:result=/tmp/transforms.trf -f null -

# Pass 2: Apply stabilization + sharpening
ffmpeg -n -i "$INPUT" -vf "vidstabtransform=smoothing=10:input=/tmp/transforms.trf,unsharp=5:5:0.8:5:5:0.3" "$OUTPUT"

rm /tmp/transforms.trf

shakiness 1-10 (how shaky is source), smoothing (higher = smoother camera, may crop edges).

Transitions

Cross-fade between two clips (44+ transition types available):

ffmpeg -n -i first.mp4 -i second.mp4 -filter_complex \
  "xfade=transition=fade:duration=2:offset=5" "$OUTPUT"

Available xfade transitions: fade, dissolve, wipeleft, wiperight, wipeup, wipedown, slideleft, slideright, slideup, slidedown, circlecrop, rectcrop, distance, fadeblack, fadewhite, radial, smoothleft, smoothright, smoothup, smoothdown, circleopen, circleclose, vertopen, vertclose, horzopen, horzclose, diagtl, diagtr, diagbl, diagbr, hlslice, hrslice, vuslice, vdslice, pixelize, squeezeh, squeezev, zoomin, fadegrays, wipetl, wipetr, wipebl, wipebr, coverleft, coverright, coverup, coverdown, revealleft, revealright, revealup, revealdown.

Fade in/out:

# Fade in first 2 seconds
ffmpeg -n -i "$INPUT" -vf "fade=t=in:st=0:d=2" -af "afade=t=in:st=0:d=2" "$OUTPUT"

# Fade out last 2 seconds (get duration first with ffprobe)
ffmpeg -n -i "$INPUT" -vf "fade=t=out:st=OFFSET:d=2" -af "afade=t=out:st=OFFSET:d=2" "$OUTPUT"

Color Correction

Load references/filters.md for the full filter catalog. Quick reference:

• Brightness/contrast: -vf "eq=brightness=0.06:contrast=1.2:saturation=1.3"
• Tone curves preset: -vf "curves=preset=lighter" (also: darker, increase_contrast, vintage, etc.)
• Color balance: -vf "colorbalance=rs=0.3:gs=-0.1:bs=0.0"
• 3D LUT: -vf "lut3d=file=my_lut.cube"
• Grayscale: -vf "colorchannelmixer=.3:.4:.3:0:.3:.4:.3:0:.3:.4:.3"
• Blur: -vf "gblur=sigma=10"
• Sharpen: -vf "unsharp=5:5:1.0:5:5:0.0"
• Denoise: -vf "hqdn3d=4:3:6:4.5" (fast) or -vf "nlmeans=s=3.5:p=7:r=15" (best quality)

Contact Sheet / Thumbnail Grid

ffmpeg -n -i "$INPUT" -vf "select=not(mod(n\,100)),scale=320:180,tile=4x4" -frames:v 1 contact_sheet.png

Extract Single Frame

ffmpeg -n -ss 00:01:30 -i "$INPUT" -frames:v 1 -q:v 2 thumbnail.jpg

Privacy Blur (Face/Region Censoring)

Blur entire face region (static coordinates — use ffprobe or MediaPipe to find face bounding box):

ffmpeg -n -i "$INPUT" -vf "delogo=x=200:y=100:w=150:h=150" "$OUTPUT"

Box blur a region (more control):

ffmpeg -n -i "$INPUT" -filter_complex \
  "[0:v]crop=150:150:200:100,boxblur=10[blur];[0:v][blur]overlay=200:100" "$OUTPUT"

Blur with time range (only blur between 5s and 15s):

ffmpeg -n -i "$INPUT" -filter_complex \
  "[0:v]split[main][copy];[copy]crop=150:150:200:100,boxblur=10[blur];[main][blur]overlay=200:100:enable='between(t,5,15)'" "$OUTPUT"

Full-frame blur (for B-roll background):

ffmpeg -n -i "$INPUT" -vf "boxblur=20:5" "$OUTPUT"

For AI-powered face detection + tracking blur across frames, use python3 scripts/face_tracker.py with MediaPipe BlazeFace (CPU, no VRAM needed). The face_tracker outputs bounding boxes per frame that can drive the overlay blur coordinates.

LUT Color Grading

Apply a .cube LUT file:

ffmpeg -n -i "$INPUT" -vf "lut3d=file=my_grade.cube" "$OUTPUT"

Apply with intensity control (blend between original and graded):

ffmpeg -n -i "$INPUT" -filter_complex \
  "[0:v]split[a][b];[b]lut3d=file=my_grade.cube[graded];[a][graded]blend=all_mode=normal:all_opacity=0.7" "$OUTPUT"

Common LUT sources: Download .cube files from sites like lutify.me, filtergrade.com, or create custom LUTs in DaVinci Resolve. Place LUT files alongside the project or use absolute paths.

Supported formats: .cube (most common), .3dl, .dat, .m3d

Motion Tracking Text Overlay

Static text that follows a position (manual keyframes):

ffmpeg -n -i "$INPUT" -vf "drawtext=text='Label':fontsize=24:fontcolor=white:\
x='if(lt(t,5),100+t*20,200)':y='if(lt(t,5),50+t*10,100)':\
fontfile=/usr/share/fonts/truetype/dejavu/DejaVuSans-Bold.ttf:\
box=1:boxcolor=black@0.5:boxborderw=4" "$OUTPUT"

Text with expression-based movement (smooth sine wave):

ffmpeg -n -i "$INPUT" -vf "drawtext=text='Moving Text':fontsize=36:fontcolor=white:\
x='w/2-tw/2+50*sin(t*2)':y='h/2-th/2+30*cos(t*2)':\
fontfile=/usr/share/fonts/truetype/dejavu/DejaVuSans-Bold.ttf" "$OUTPUT"

For complex tracking (follow a face or object through a video), combine scripts/face_tracker.py bounding box output with per-frame drawtext coordinates. Export face centers from the tracker, then generate a drawtext filter with frame-by-frame x/y expressions.

Output Naming Convention

When user doesn't specify output name, derive it from input:

• video.mp4 → video_trimmed.mp4, video_stabilized.mp4, video_2x.mp4, etc.
• For batch: video_001.mp4, video_002.mp4, etc.